code wiki / _hdl_build / nx_metal_gcode_gate.nx

nx_metal_gcode_gate.nx

buildroot/runtime/_hdl_build/nx_metal_gcode_gate.nx

5112 B97 linesdepth 6pulls 7 transitivereach 0 importersview sourcekind gate/proof
docsdependenciesstructsconstsfunctions

about

nx_metal_gcode_gate.nx -- GATE: 3D-printing workstream R3, metal (WAAM). Completes the material ladder. T1 valid WAAM G-code (arc + wire, no FDM hotend), T2 layers from the steel profile, T3 CARDINAL-26 never- brick (no firmware/EEPROM), T4 WAAM process present (arc on/off + inter-layer cooling dwell), T5 wire feed accumulates, T6 HONEST SAFETY note (real arc-weld run needs operator interlocks), T7 sovereign provenance. license_tier: ORIGINAL

dependencies 5 imports · 0 importers

nx_metal_gcode.nx nx_print_material.nx nx_food_science.nx nx_seg_store.nx nx_syscalls.nx nx_metal_gcode_gate.nx

imports: nx_metal_gcode.nxnx_print_material.nxnx_food_science.nxnx_seg_store.nxnx_syscalls.nx

imported by: nobody (leaf or entry point)

call flow from main pre-order; caps 40 nodes / depth 6 declared; ↻ = already shown

main g_p sys_write pm_seed sys_mmap ss_begin ss_begin_cap sys_mmap ↻ fd_streq_store sys_mmap ↻ ss_get sys_mmap ↻ ss_scan sys_mmap ↻ ss_manifest_dyn ss_manifest_file_dyn ss_scan_seglist ss_len sys_mmap ↻ ss_cat ss_readall ss_r32 ss_add ss_add2 ss_w32 ss_len ↻ fd_seg_next sys_mmap ↻ ss_manifest ss_manifest_file sys_mmap ↻ ss_cat ↻ ss_readall ↻ ss_commit ss_segid_ok sys_mmap ↻ ss_cat ↻ ss_catn sys_mmap ↻ sys_write ↻

structs

none

consts

12const MG_PRINT: *u8 = "knowledge/store/print-"
13const MG_OUT: *u8 = "knowledge/staging/print/steel_wall.gcode"

functions

15func g_p(s: *u8) -> i64 { var n: i64 = 0; while s[n] != (0 as u8) { n = n + 1 } sys_write(1, s, n); return 0 }
called by 1: main calls 1: sys_write
16func g_i(v: i64) -> i64
called by 1: main calls 2: sys_mmapsys_write
25func main() -> i64
calls 10: g_ppm_seedsys_mmapmg_emitg_ias_contains+4